3d microelectrodes Search Results


90
Microelectrodes Inc 3d pyrolytic carbon
Comparison of the analytical characteristics obtained with PB/CB-PLA for the detection of hydrogen peroxide with works reported in the literature
3d Pyrolytic Carbon, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/suspended+3d+pyrolytic+carbon/pmc09550156-1-0-3
Average 90 stars, based on 1 article reviews
3d pyrolytic carbon - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc 3d micro-electrodes
Comparison of the analytical characteristics obtained with PB/CB-PLA for the detection of hydrogen peroxide with works reported in the literature
3d Micro Electrodes, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+micro+electrodes/us11668698-33-7-8
Average 90 stars, based on 1 article reviews
3d micro-electrodes - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Axion BioSystems the 3d microelectrode array 20
Comparison of the analytical characteristics obtained with PB/CB-PLA for the detection of hydrogen peroxide with works reported in the literature
The 3d Microelectrode Array 20, supplied by Axion BioSystems, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/the+3d+microelectrode+array+20/us12195718-72-11-23
Average 90 stars, based on 1 article reviews
the 3d microelectrode array 20 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc with 3d interdigital structures
Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar <t>interdigital</t> structure, (c) <t>3D</t> interdigital structure, (d) other types of 3D architecture (microtube structure).
With 3d Interdigital Structures, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/with+3d+interdigital+structures/pmc09552904-60-2-0
Average 90 stars, based on 1 article reviews
with 3d interdigital structures - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc 3d carbon microelectrodes
Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar <t>interdigital</t> structure, (c) <t>3D</t> interdigital structure, (d) other types of 3D architecture (microtube structure).
3d Carbon Microelectrodes, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+carbon+microelectrodes/10__1016_slash_j__carbon__2017__05__090-180-7-9
Average 90 stars, based on 1 article reviews
3d carbon microelectrodes - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc 3d sma microelectrodes with cliipping structure
Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar <t>interdigital</t> structure, (c) <t>3D</t> interdigital structure, (d) other types of 3D architecture (microtube structure).
3d Sma Microelectrodes With Cliipping Structure, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+sma+microelectrodes+with+cliipping+structure/10__5772_slash_25867-88-5-3
Average 90 stars, based on 1 article reviews
3d sma microelectrodes with cliipping structure - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Dassault Systemes 3d microelectrode array 20
Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar <t>interdigital</t> structure, (c) <t>3D</t> interdigital structure, (d) other types of 3D architecture (microtube structure).
3d Microelectrode Array 20, supplied by Dassault Systemes, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+microelectrode+array+20/us11746320-163-2-17
Average 90 stars, based on 1 article reviews
3d microelectrode array 20 - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Omnetics Connector Corporation 3d microelectrodes
a Sketch of the neural interface with protruding microelectrodes decreasing the distance to the neurons. b Layout of neural interface design with dimensions and compartment descriptions. c Process flow for the microfabrication of a flexible polyimide-based <t>3D</t> <t>MEA.</t> d Schematic view of the MFI technique connecting a flexible MEA with a rigid printed circuit board (PCB). A tiny gold ball (~Ø 90 µm) is formed at the capillary by the flame-off electrode. The gold ball is pushed against the hole of the MEA contact pad onto the heated PCB bond pad with a defined force and ultrasonic energy connecting the components mechanically and electrically. Finally, the capillary is lifted, and the gold wire is cut off, leaving a tiny gold stud that acts as a microrivet between the MEA and the PCB
3d Microelectrodes, supplied by Omnetics Connector Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+microelectrodes/pmc09772315-153-18-27
Average 90 stars, based on 1 article reviews
3d microelectrodes - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc 3d microelectrodes embedded in microchannels of microfluidic devices
a Sketch of the neural interface with protruding microelectrodes decreasing the distance to the neurons. b Layout of neural interface design with dimensions and compartment descriptions. c Process flow for the microfabrication of a flexible polyimide-based <t>3D</t> <t>MEA.</t> d Schematic view of the MFI technique connecting a flexible MEA with a rigid printed circuit board (PCB). A tiny gold ball (~Ø 90 µm) is formed at the capillary by the flame-off electrode. The gold ball is pushed against the hole of the MEA contact pad onto the heated PCB bond pad with a defined force and ultrasonic energy connecting the components mechanically and electrically. Finally, the capillary is lifted, and the gold wire is cut off, leaving a tiny gold stud that acts as a microrivet between the MEA and the PCB
3d Microelectrodes Embedded In Microchannels Of Microfluidic Devices, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+microelectrodes+embedded+in+microchannels+of+microfluidic+devices/us11661469-328-32-29
Average 90 stars, based on 1 article reviews
3d microelectrodes embedded in microchannels of microfluidic devices - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Microelectrodes Inc 3d-nanostructured array microelectrodes
a Sketch of the neural interface with protruding microelectrodes decreasing the distance to the neurons. b Layout of neural interface design with dimensions and compartment descriptions. c Process flow for the microfabrication of a flexible polyimide-based <t>3D</t> <t>MEA.</t> d Schematic view of the MFI technique connecting a flexible MEA with a rigid printed circuit board (PCB). A tiny gold ball (~Ø 90 µm) is formed at the capillary by the flame-off electrode. The gold ball is pushed against the hole of the MEA contact pad onto the heated PCB bond pad with a defined force and ultrasonic energy connecting the components mechanically and electrically. Finally, the capillary is lifted, and the gold wire is cut off, leaving a tiny gold stud that acts as a microrivet between the MEA and the PCB
3d Nanostructured Array Microelectrodes, supplied by Microelectrodes Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+nanostructured+array+microelectrodes/10__1016_slash_j__coelec__2021__100924-57-23-24
Average 90 stars, based on 1 article reviews
3d-nanostructured array microelectrodes - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
Ayanda GmbH 3d recording microelectrodes
A: Top view of the experimental MEA chamber (A1). The “spinal MEA” from Ayanda BioSystems consists <t>of</t> <t>4×15</t> <t>3D</t> recording electrodes (arrows in A2) and 8 2D stimulation electrodes (rectangles in A2). Current-controlled monopolar stimulations were applied between a 2D stimulation electrode and an external cylindrical Ag/AgCl ground electrode. The potential field V generated in the medium was measured by the 60 recording microelectrodes, and the stimulation electrode voltage ( V metal = V stim ) was recorded with a home-made follower circuit. Peak values were measured at the end of the cathodic phase of the pulse stimulus (see example in A3). B: Top view of the 3D finite element model used for the computation of the potential field. The 60 recording electrodes were modeled by cones, and the stimulation electrode by a 2D rectangular surface on the substrate (B2). All these electrodes were represented as surface boundaries in the finite element model. When present, the neural tissue was modeled as a 200-µm-thick parallelepiped with a different electrical conductivity than that of the Ringer solution (B3). The 3D mesh consisted of 63,214 tetrahedral Lagrange P2 elements, corresponding to 101,105 degrees of freedom (B4).
3d Recording Microelectrodes, supplied by Ayanda GmbH, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+recording+microelectrodes/pmc02652101-36-9-50
Average 90 stars, based on 1 article reviews
3d recording microelectrodes - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

90
DuPont de Nemours 3d microelectrode arrays (meas)
<t>3D</t> illustrations of the two methods for printing 3D <t>microelectrode</t> arrays: ( a , b ) stationary and ( c , d ) continuous.
3d Microelectrode Arrays (Meas), supplied by DuPont de Nemours, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/3d+microelectrodes/3d+microelectrode+arrays++meas+/pmc08229631-40-0-17
Average 90 stars, based on 1 article reviews
3d microelectrode arrays (meas) - by Bioz Stars, 2026-11
90/100 stars
  Buy from Supplier

Image Search Results


Comparison of the analytical characteristics obtained with PB/CB-PLA for the detection of hydrogen peroxide with works reported in the literature

Journal: Mikrochimica Acta

Article Title: New carbon black-based conductive filaments for the additive manufacture of improved electrochemical sensors by fused deposition modeling

doi: 10.1007/s00604-022-05511-2

Figure Lengend Snippet: Comparison of the analytical characteristics obtained with PB/CB-PLA for the detection of hydrogen peroxide with works reported in the literature

Article Snippet: 3D pyrolytic carbon microelectrodes , H 2 O 2 , 0.3–8.0 , 0.16 , [ ] .

Techniques: Comparison

Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar interdigital structure, (c) 3D interdigital structure, (d) other types of 3D architecture (microtube structure).

Journal: Nanoscale Advances

Article Title: Miniaturized lithium-ion batteries for on-chip energy storage

doi: 10.1039/d2na00566b

Figure Lengend Snippet: Schematic diagrams of various micro-LIBs according to different cell microstructures: (a) laminated thin film structure, (b) planar interdigital structure, (c) 3D interdigital structure, (d) other types of 3D architecture (microtube structure).

Article Snippet: Microelectrodes with 3D interdigital structures usually consist of multilayer filaments ( ) or vertically aligned, isolated vertical columns grown on interdigital current collectors.

Techniques:

a Sketch of the neural interface with protruding microelectrodes decreasing the distance to the neurons. b Layout of neural interface design with dimensions and compartment descriptions. c Process flow for the microfabrication of a flexible polyimide-based 3D MEA. d Schematic view of the MFI technique connecting a flexible MEA with a rigid printed circuit board (PCB). A tiny gold ball (~Ø 90 µm) is formed at the capillary by the flame-off electrode. The gold ball is pushed against the hole of the MEA contact pad onto the heated PCB bond pad with a defined force and ultrasonic energy connecting the components mechanically and electrically. Finally, the capillary is lifted, and the gold wire is cut off, leaving a tiny gold stud that acts as a microrivet between the MEA and the PCB

Journal: Microsystems & Nanoengineering

Article Title: A flexible protruding microelectrode array for neural interfacing in bioelectronic medicine

doi: 10.1038/s41378-022-00466-z

Figure Lengend Snippet: a Sketch of the neural interface with protruding microelectrodes decreasing the distance to the neurons. b Layout of neural interface design with dimensions and compartment descriptions. c Process flow for the microfabrication of a flexible polyimide-based 3D MEA. d Schematic view of the MFI technique connecting a flexible MEA with a rigid printed circuit board (PCB). A tiny gold ball (~Ø 90 µm) is formed at the capillary by the flame-off electrode. The gold ball is pushed against the hole of the MEA contact pad onto the heated PCB bond pad with a defined force and ultrasonic energy connecting the components mechanically and electrically. Finally, the capillary is lifted, and the gold wire is cut off, leaving a tiny gold stud that acts as a microrivet between the MEA and the PCB

Article Snippet: Fig. 4 Fabricated 3D neural interface. a Photograph of the fabricated neural device showing the flexible MEA with 3D microelectrodes connected to a PCB with a soldered Omnetics connector. b Assembling of the neural interface. b-i Macroscopic image of the MEA connector with the corresponding PCB. b-ii Scanning electron microscopy (SEM) image of an assembled neural device with finger structures electrically connected by microrivets to the underlying PCB. b-iii SEM image of a single gold bump stud connecting the neural interface contact pad to the PCB bond pad.

Techniques:

a Photograph of the fabricated neural device showing the flexible MEA with 3D microelectrodes connected to a PCB with a soldered Omnetics connector. b Assembling of the neural interface. b-i Macroscopic image of the MEA connector with the corresponding PCB. b-ii Scanning electron microscopy (SEM) image of an assembled neural device with finger structures electrically connected by microrivets to the underlying PCB. b-iii SEM image of a single gold bump stud connecting the neural interface contact pad to the PCB bond pad. The entire hole is filled and covered by the gold stud, which acts as a microrivet. c Macroscopic images of the neural interface with compartment descriptions and functions of the entire measurement field ( c-i ) and of the area with electrodes arranged in a chessboard pattern ( c-ii ). The electrode heads were coated with TiN, which appears black in the images. d Macroscopic images ( d-i , d-ii ) and SEM images ( d-iii , d-iv ) of an MEA and of a single microelectrode (Ø 50 µm, height ~50 µm). The pillars exhibit parylene C side insulation, and their heads were wet etched and coated with TiN. The microelectrode shown in d-iv has a TiN coating on its head of 4–5 µm height. e SEM images of single modified microelectrodes, which were either wet etched ( e-i , e-ii ) or wet etched and TiN-coated ( e-iii , e-iv ) (both Ø 20 µm with a height of ~60 µm). The pillars were etched by RIE (Fig. , step i) until the parylene C was removed from the exposed tops and sides of the pillar heads. Scale bars: b - i : 2 mm, c - ii : 1 mm; b - ii : 500 µm; d - iii : 200 µm; b - iii , d - iv , e - i , e - iii : 20 µm; e - ii , e - iv : 1 µm

Journal: Microsystems & Nanoengineering

Article Title: A flexible protruding microelectrode array for neural interfacing in bioelectronic medicine

doi: 10.1038/s41378-022-00466-z

Figure Lengend Snippet: a Photograph of the fabricated neural device showing the flexible MEA with 3D microelectrodes connected to a PCB with a soldered Omnetics connector. b Assembling of the neural interface. b-i Macroscopic image of the MEA connector with the corresponding PCB. b-ii Scanning electron microscopy (SEM) image of an assembled neural device with finger structures electrically connected by microrivets to the underlying PCB. b-iii SEM image of a single gold bump stud connecting the neural interface contact pad to the PCB bond pad. The entire hole is filled and covered by the gold stud, which acts as a microrivet. c Macroscopic images of the neural interface with compartment descriptions and functions of the entire measurement field ( c-i ) and of the area with electrodes arranged in a chessboard pattern ( c-ii ). The electrode heads were coated with TiN, which appears black in the images. d Macroscopic images ( d-i , d-ii ) and SEM images ( d-iii , d-iv ) of an MEA and of a single microelectrode (Ø 50 µm, height ~50 µm). The pillars exhibit parylene C side insulation, and their heads were wet etched and coated with TiN. The microelectrode shown in d-iv has a TiN coating on its head of 4–5 µm height. e SEM images of single modified microelectrodes, which were either wet etched ( e-i , e-ii ) or wet etched and TiN-coated ( e-iii , e-iv ) (both Ø 20 µm with a height of ~60 µm). The pillars were etched by RIE (Fig. , step i) until the parylene C was removed from the exposed tops and sides of the pillar heads. Scale bars: b - i : 2 mm, c - ii : 1 mm; b - ii : 500 µm; d - iii : 200 µm; b - iii , d - iv , e - i , e - iii : 20 µm; e - ii , e - iv : 1 µm

Article Snippet: Fig. 4 Fabricated 3D neural interface. a Photograph of the fabricated neural device showing the flexible MEA with 3D microelectrodes connected to a PCB with a soldered Omnetics connector. b Assembling of the neural interface. b-i Macroscopic image of the MEA connector with the corresponding PCB. b-ii Scanning electron microscopy (SEM) image of an assembled neural device with finger structures electrically connected by microrivets to the underlying PCB. b-iii SEM image of a single gold bump stud connecting the neural interface contact pad to the PCB bond pad.

Techniques: Electron Microscopy, Modification

A: Top view of the experimental MEA chamber (A1). The “spinal MEA” from Ayanda BioSystems consists of 4×15 3D recording electrodes (arrows in A2) and 8 2D stimulation electrodes (rectangles in A2). Current-controlled monopolar stimulations were applied between a 2D stimulation electrode and an external cylindrical Ag/AgCl ground electrode. The potential field V generated in the medium was measured by the 60 recording microelectrodes, and the stimulation electrode voltage ( V metal = V stim ) was recorded with a home-made follower circuit. Peak values were measured at the end of the cathodic phase of the pulse stimulus (see example in A3). B: Top view of the 3D finite element model used for the computation of the potential field. The 60 recording electrodes were modeled by cones, and the stimulation electrode by a 2D rectangular surface on the substrate (B2). All these electrodes were represented as surface boundaries in the finite element model. When present, the neural tissue was modeled as a 200-µm-thick parallelepiped with a different electrical conductivity than that of the Ringer solution (B3). The 3D mesh consisted of 63,214 tetrahedral Lagrange P2 elements, corresponding to 101,105 degrees of freedom (B4).

Journal: PLoS ONE

Article Title: Improved Focalization of Electrical Microstimulation Using Microelectrode Arrays: A Modeling Study

doi: 10.1371/journal.pone.0004828

Figure Lengend Snippet: A: Top view of the experimental MEA chamber (A1). The “spinal MEA” from Ayanda BioSystems consists of 4×15 3D recording electrodes (arrows in A2) and 8 2D stimulation electrodes (rectangles in A2). Current-controlled monopolar stimulations were applied between a 2D stimulation electrode and an external cylindrical Ag/AgCl ground electrode. The potential field V generated in the medium was measured by the 60 recording microelectrodes, and the stimulation electrode voltage ( V metal = V stim ) was recorded with a home-made follower circuit. Peak values were measured at the end of the cathodic phase of the pulse stimulus (see example in A3). B: Top view of the 3D finite element model used for the computation of the potential field. The 60 recording electrodes were modeled by cones, and the stimulation electrode by a 2D rectangular surface on the substrate (B2). All these electrodes were represented as surface boundaries in the finite element model. When present, the neural tissue was modeled as a 200-µm-thick parallelepiped with a different electrical conductivity than that of the Ringer solution (B3). The 3D mesh consisted of 63,214 tetrahedral Lagrange P2 elements, corresponding to 101,105 degrees of freedom (B4).

Article Snippet: The array was composed of a 4×15 grid of 3D recording microelectrodes (base diameter: 80 μm, height: 80 μm, width spacing: 250 μm, length spacing: 750 μm), 8 2D rectangular stimulation electrodes (60×250 μm 2 ), and 4 integrated ground disk electrodes (diameter 1 mm), all made of Pt ( Ayanda Biosystems , Lausanne, Switzerland).

Techniques: Generated

3D illustrations of the two methods for printing 3D microelectrode arrays: ( a , b ) stationary and ( c , d ) continuous.

Journal: Sensors (Basel, Switzerland)

Article Title: Inkjet-Printed and Electroplated 3D Electrodes for Recording Extracellular Signals in Cell Culture

doi: 10.3390/s21123981

Figure Lengend Snippet: 3D illustrations of the two methods for printing 3D microelectrode arrays: ( a , b ) stationary and ( c , d ) continuous.

Article Snippet: 3D microelectrode arrays (MEAs) were printed on a 125 μm thick polyethylene naphthalate (PEN) film (Teonex Q65HA, DuPont Teijin Films, Wilton, UK) using a silver nanoparticle ink (Silverjet DGP 40LT-15C, Sigma-Aldrich, St. Louis, MO, USA) with a state-of-the-art inkjet printer (CeraPrinter F-Series, Ceradrop, Limoges, France).

Techniques:

Tilt-corrected scanning electron microscope images of ( a ) a sintered 3D microelectrode array, ( b ) a pillar under focused ion beam analysis, and ( c ) a pillar after bulk milling and polishing. Different magnifications of the pillar shown in ( c ) are shown in ( d – f ). All pillars were printed with approx. 1600 droplets of AgNP ink, displaying a width of ~32 μm and a height of 500–560 μm. All images were captured using an acceleration voltage of 3 kV and a substrate tilted at 52–54°. Scale bars represent ( a ) 500 μm, ( b ) and ( c ) 100 μm, ( d ) 10 μm, ( e ) 1 μm, and ( f ) 100 nm.

Journal: Sensors (Basel, Switzerland)

Article Title: Inkjet-Printed and Electroplated 3D Electrodes for Recording Extracellular Signals in Cell Culture

doi: 10.3390/s21123981

Figure Lengend Snippet: Tilt-corrected scanning electron microscope images of ( a ) a sintered 3D microelectrode array, ( b ) a pillar under focused ion beam analysis, and ( c ) a pillar after bulk milling and polishing. Different magnifications of the pillar shown in ( c ) are shown in ( d – f ). All pillars were printed with approx. 1600 droplets of AgNP ink, displaying a width of ~32 μm and a height of 500–560 μm. All images were captured using an acceleration voltage of 3 kV and a substrate tilted at 52–54°. Scale bars represent ( a ) 500 μm, ( b ) and ( c ) 100 μm, ( d ) 10 μm, ( e ) 1 μm, and ( f ) 100 nm.

Article Snippet: 3D microelectrode arrays (MEAs) were printed on a 125 μm thick polyethylene naphthalate (PEN) film (Teonex Q65HA, DuPont Teijin Films, Wilton, UK) using a silver nanoparticle ink (Silverjet DGP 40LT-15C, Sigma-Aldrich, St. Louis, MO, USA) with a state-of-the-art inkjet printer (CeraPrinter F-Series, Ceradrop, Limoges, France).

Techniques: Microscopy, Microelectrode Array

( a ) Magnitude and ( b ) phase of the impedance of electroplated Ag-Au-Pt 3D microelectrodes, which were printed with different droplet numbers. The mean and standard deviation (solid line and shaded area, respectively) were calculated using 4 samples. ( c – l ) Tilt-corrected SEM images of the same 3D microelectrodes taken at a substrate tilt of ( c – g ) 0° and ( h – l ) 45°. All SEM images used an acceleration voltage of 15 kV. A magnification of ( c – j ) 1000×, ( k ) 350×, and ( l ) 250× was used. All scale bars shown have a length of 40 μm. The numbers in the legend and the upper right corner of the SEM images correspond to the amount of ejected Ag nanoparticle droplets.

Journal: Sensors (Basel, Switzerland)

Article Title: Inkjet-Printed and Electroplated 3D Electrodes for Recording Extracellular Signals in Cell Culture

doi: 10.3390/s21123981

Figure Lengend Snippet: ( a ) Magnitude and ( b ) phase of the impedance of electroplated Ag-Au-Pt 3D microelectrodes, which were printed with different droplet numbers. The mean and standard deviation (solid line and shaded area, respectively) were calculated using 4 samples. ( c – l ) Tilt-corrected SEM images of the same 3D microelectrodes taken at a substrate tilt of ( c – g ) 0° and ( h – l ) 45°. All SEM images used an acceleration voltage of 15 kV. A magnification of ( c – j ) 1000×, ( k ) 350×, and ( l ) 250× was used. All scale bars shown have a length of 40 μm. The numbers in the legend and the upper right corner of the SEM images correspond to the amount of ejected Ag nanoparticle droplets.

Article Snippet: 3D microelectrode arrays (MEAs) were printed on a 125 μm thick polyethylene naphthalate (PEN) film (Teonex Q65HA, DuPont Teijin Films, Wilton, UK) using a silver nanoparticle ink (Silverjet DGP 40LT-15C, Sigma-Aldrich, St. Louis, MO, USA) with a state-of-the-art inkjet printer (CeraPrinter F-Series, Ceradrop, Limoges, France).

Techniques: Standard Deviation